DIY pvc weir overflow?

Discussion in 'DIY' started by Mike F, Feb 17, 2017.

  1. Mike F

    Mike F Advisory Board

    Does anyone have experience or thoughts on using weir pvc overflows as shown in this youtube video:

    Kind of interested in giving it a try for eight 10gallon tanks to make water changes and heating a little easier...
  2. Aquaticus

    Aquaticus Administrator

    I had some tanks setup like this for a while, but it was loud, and it is a lot of PVC. It's easier to drill your tanks, IMO.
  3. Gar

    Gar Member

    I got 2 set up useing them. They have been running for about 2 years now. It is alot for just using them for water changes.
  4. tjudy

    tjudy Executive Board Staff Member

    I have done it, but they can be touchy if they lose siphon, and they take up a lot of space in the tank. I drill...
  5. steve

    steve Active Member

    drilling tanks is easy and the bits are relatively cheap. once you have done the drilling the sky is the limit for what you use as an overflow guard. I tend to use something that is the right size that I find in the plumbing area of menards.
    Mike F likes this.

Share This Page